TM-9-2320-273-34
TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1980
TM-9-2320-273-34 - Page 87 of 801
TM9-2320-273-34
Figure 2-40. Remove/Install Transfer Case Fastening Capscrews.
NOTE
In steps (4) and (5), three men should be
available. Two men supporting the trans-
fer case and one operating the jack; then
installing the capscrews. Top two capscrews
on each side must go in first.
(4) Support transfer case on suitable jack and position under vehicle.
(5) Install four capscrews (5) and Iockwashers (4) that secure the transfer case to each frame
rail (fig. 2-40). Tighten capscrews to 170 Ib-ft (231 N·m) torque.
2-71
Back to Top
