TM9-2320-273-34
(3) Tag and disconnect two air lines from lockup air chamber (fig. 2-39).
TA 073977
Figure 2-39. Disconnect/Connect Air Lines from Lockup Air Chamber.
NOTE
In steps
(4)
and (5), three men should be
available. Two men supporting the trans-
fer case and one removing the capscrews;
then operating the jack.
(4) Support the transfer case with a suitable jack.
(5)
Remove four capscrews (5) and washers (4) that secure the transfer case to each frame
rail (fig. 2-40); then lower and remove the transfer case.
(6) Remove four capscrews (1), insulators (2) washers (10) and nuts (11), then remove
support (3) and bracket (9).
(7) Remove four capscrews (6) and nuts (13).
(8) Remove capscrew (7), nut (12), and bracket (8).
c.
Installation Procedure.
(1) Install bracket (8) with capscrew (7) and nut ( 12).
(2) Install four capscrews (6) and nuts (13).
(3) Install four capscrews (1) thru insulators (2), support (3), brackets (8) and (9). Secure
with four washers (10) and nut (11).
2-70