TM9-2320-273-34
(5) Place a jack rated for ten ton capacity in center of front axle (fig. 2-44).
Figure 2-44. Remove/lnstall Spring U-Bolts.
(6) Remove shock mounting bracket and two U-bolts from each spring by removing
attaching nuts and washers.
(7)
(8)
NOTE
Three men may be required to remove the
assembled axle from under the vehicle.
With one man guiding each end of the axle, lower jack and pull axle out from under vehicle.
Using a sling and hoist, place axle on suitable bench.
2-75