TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 222 of 801

TM 9-2320-273-34

gg.

Place knob (3) in position on the valve. Install pin (4) to hold it.

hh.

Install two tube elbows and air lines (5) on the selector and valve

correctly if they are not crossed.

The air lines are installed

ii.

Adjust the plunger, installed in step q, so that the shift starts at 0.090 in. (2.30 mm) movement

as the lever is moved into the gate (fig. 7-43).

Figure 743. Adjust Shift Plunger.

7-44