TM 9-2320-273-34
NOTE
Place a wedge between gears (1, 3 fig.
7-102) to aid in removal of bolts (6).
(17)
Bend Iockplate tabs (2) away from the bolts (6) on each shaft; then remove bolts (6),
washers (5) and thrust washers (4).
(18)
Remove gear (1) from center plate.
LEGEND:
1.
GEAR
2. TAB (3)
3. GEAR (3)
4.
THRUST WASHER (6)
5. WASHER (3)
6.
BOLT (6)
TA 074147
Figure 7-102. Remove Center Plate Gears.
7-106