TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 293 of 801

(8)

(9)

(10)

(11)

(12)

TM 9-2320-273-34

Install collar (2) and reverse shift fork (1). Make sure that teeth of collar (2) are up.

Apply liquid gasket (item 21, Appendix B) to clean surface of rear case as shown.

If removed, install O-ring and plug in center plate.

Apply liquid gasket to the clean rear case mating surface of the center plate.

Drive three dowels (fig. 7-110) up 1/8 inch so that they can guide installation of center plate.

TA 074507

Figure 7-110. Install Center Plate.

7-115