TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 299 of 801

TM 9-2320-273-34

(31)

Install two 3/8”-16 NC forged eyebolts in the front case and fasten a hoist to the eyebolts.

Put front case in position on plate.

(32)

Install 19 bolts that hold the rear case and the front case together. There are 15 long bolts

and four short ones. Torque to 36 + 2 Ib-ft (46 + 3 N- m).

(33)

If the cover and gasket were removed, install using eight bolts and washers.

(34)

Put the transmission in a horizontal position (fig. 7-116) and install oil spray tubes (1) and

(2). Spray tube (2) has a relief valve in the end. Spray tube (1) has an orifice in the end. Make sure the pins

on the tubes are in alinement with the notch in the rear case.

1.

SPRAY TUBE

2. SPRAY TUBE

Figure 7-116. Install Spray Tubes.

TA 074158

7-121