TM9-2320-273-34
d. Assemble and Install Front Housing and Brake.
(1) Apply a small amount of silicone grease (item 22, Appendix B) on the O-ring seal bore
and seal rings (3, fig. 7-122). Install an O-ring and a seal ring in outer edge of piston (4) and an O-ring
and seal ring in plate (2).
2. PLATE
3. SEAL RING AND O-RING
4.
PISTON
Figure 7-122. Install Outer Piston.
TA 074136
(2) If removed, install dowel pin (1) in plate (2) using a suitable press.
7-127