TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 311 of 801

TM9-2320-273-34

(21) Install two O-rings (3).

(22) Apply liquid gasket (item 21, Appendix B) around perimeter of plate (as shown) and

mating surface of front case.

(23) position front brake assembly (1, fig. 7-1 28) on the front case. Install bolts (2), (6), and

(3) (Bolts (2) and (6) are the same size; bolt (3) is shorter.) Tighten bolts (2) and (6) to 36 ± 2 Ib-ft

(46 ± 3 N-m) torque; bolt (3) to 55 ± 5 Ib-ft (75 ± 7 N-m) torque.

1.

BRAKE ASSEMBLY

2. BOLT (2)

6. BOLT (2)

3. BOLT

7. SNAPRING

4.

HUB

8. BEARING

5. BEARING RACE (2)

9. DISK

Figure 7-128. Install Front Brake and Hub.

TA 074165

7-133