TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 316 of 801

TM9-2320-273-34

(9) Position plates (1, fig. 7-133) and (2) on the piston. Holes in plate (1) must be positioned

over four springs (3). Evenly install the nuts and washers that hold plate (2) to the piston. Torque to

36 ± 2 Ib-ft (46 ± 3 N-m). Make sure that four spacers (4) fit into cutout of plates (1) and (2).

1.

PLATE

2. PLATE

3. SPRING (4)

4. SPACER (4)

Figure 7-133. Install Clutch Plate.

TA 074170

7-138