TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 319 of 801

TM9-2320-273-34

(12) Position inner hub (3) on the piston assembly.

(13) position outer hub (fig. 7-136) on the adapter. Be sure the largest cutout in hub splines are

positioned over valves on piston.

Figure 7-136. Install Outer Hub.

TA 074173

(14) Apply OE/HDO 30 oil to disks (fig. 7-137); then install 10 thick plates (teeth on outside

diameter) and 10 disks (teeth on inside diameter). Start with a thick plate and end with a disk; then

install one plate and two spacer plates on top as required.

7-141