TM9-2320-273-34
(9) Position outer hub (2) jn cover (3).
(10) Position ring (2, fig. 7-145) on the hub.
LEGEND:
1.
BEARING RACE (2)
2.
RING
3. SHAFT
4.
BEARING
5. SEAL RING
Figure 7-145. Install Shaft Assembly.
TA 074182
(11) Install shaft (3) in the hub, turn assembly over and install O-ring, retainer and center bolt
to the shaft.
(12) Install bearing races (1) and bearing (4) on the shaft. Replace seal ring (5) and lubricate
with silicone grease.
(13)
Install spacer (5, fig. 7-146) on center hub (4).
7-150