TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 336 of 801

TM9-2320-273-34

(28) Install bearing and races.

(29) Install gear plate on clutch hub.

(30) Position the brake assembly on the clutch assembly. Engage splines on both brake disks

with gear plate. Turn shaft to make sure it turns freely; then install three bolts and washers and torque to

18 + 2 Ib-ft (24 + 3 N-m).

(31) Install bearing (fig. 7-153) on the plate with a soft hammer.

Figure 7-153. Install Rear Clutch Hub Bearing.

7-158