TM9-2320-273-34
(2) Remove the two capscrews (2, fig. 8-3) and end yoke plate (3).
(3) Pull the yoke from the end of the shaft with a suitable puller (fig
8-2).
TA 074195
Figure 8-2. Yoke Removal.
NOTE
The procedure is the same for all three
yokes. (Lower front output yoke retainer
capscrews are not Iockwired.)
(4)
two capscrews
fig. 8-21).
Remove the two lower output yokes (Front-17, fig. 8-11; Rear-13, fig. 8-21
( Front-56, fig. 8-11; Rear-14, fig. 8-21) and yoke plate (Front-55, fig. 8-11
) by removing
; Rear-16,
8-2