TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 334 of 801

TM9-2320-273-34

(22) position 12 spacers (3, fig. 7-151)and 12 springs (2) on plate (1).

1.

PLATE

2. SPRING (12)

4.

PLATE

3. SPACER (12)

5.

BOLT AND WASHER (12)

Figure 7-151. Assemble Brake Plates and Springs.

TA 074188

(23)

Position plate (1) on plate (4). Loosely install 12 bolts and washers (5) that hold the plate.

(24)

Make sure the spacers are properly alined with the holes; then turn bolts down evenly -

a few turns at a time on each - until all are turned down. Torque the bolts to 36 ± 2 Ib-ft (46 ± 3 N-m).

(25) Stand rear clutch in upright position; then install a hoist adapter (5P8693) on the rear

brake assembly.

(26) Apply liquid gasket (item 21, App. B) to the mating surfaces of the rear clutch and rear

brake assemblies.

(27) Apply a light coat of silicone grease to O-ring and install O-ring in the rear brake assembly

(fig. 7-152).

7-156