TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 327 of 801

TM9-2320-273-34

(6) Install the original amount of shims (4) on retainer (3). Make sure that two holes in shim

pack line up with two threaded holes in retainer.

Tighten bolts alternately in order to

avoid damage to the O-ring.

NOTE

In step (7), line up scribe marks

made during disassembly.

(7) Apply light coat of thread sealant to bolts that fasten retainer (3) to housing (5); then

mount retainer on housing and tighten six bolts and washers to 55 + 5 Ib-ft (75 + 7 N-m) torque.

(8) Heat bearing (1, fig. 7-144) in oil to a maximum temperature of 275°F (135°C). Press

bearing on the hub.

LEGEND:

1.

BEARING

2. OUTER HUB

3. COVER

TA 074181

Figure 7-144. Install Bearing and Outer Hub.

7-149

CAUTIO N