TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 308 of 801

TM9-2320-273-34

(7) Place plate (4) in position on the plate.

(8) Apply OE/HDO 30 oil (item 5, Appendix B) on the two disks (2) and position the disks and

plate (3) on the plate.

(9) place six springs (2, fig. 7-125) and three small springs (3) in plate (4). Springs (3) area

double set; that is, smaller spring located inside the larger spring.

1. SPACER (6)

2. SPRING (6)

3. SPRING (3)

4.

PLATE

5. PLATE

6. SPRING, VALVE & COTTER PIN

Figure 7-125. Install Springs, Spacers, and Plate.

7-130

TA 074163