TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 704 of 801

TM 9-2320-273-34

Figure 20-17. Scribe Reference Mark Hydraulic Motor.

(3)

With a shaft end up, clamp the motor in a vise.

(4)

Remove the eight capscrews ( 1, fig. 20-18) from the front cover (3)

allen wrench.

(5)

Remove the motor from the vise. Holding the motor in both hands, tap the shaft on a

wooden block to separate the front cover (3) from the rear cover (9). The body (10) will remain with

either the front cover or the rear cover.

(6)

To separate the body from the section it remains with, remove the driven gear (8). Place

the drive gear (7) in the bearing and tap the protruding end on a wooden block.

(7)

Remove both thrust plates (6) and sealing rings (4).

Be careful not to damage the sides of the

groove or face of the front cover.

20-21

CAUTION