TM9-2320-273-34
(35) Fill transmission with fluid (Refer to LO 9-2320-273-12). Do not overfill. Check
dipstick with engine OFF.
(36) Start up engine and check for:
(a) Fluid leaks.
(b) Exhaust leaks.
(c) Unusual noises.
(37) Road test vehicle to determine that transmission functions properly.
(38) Recheck transmission fluid level with engine OFF.
2-12. Engine.
a. Removal.
(1)
Disconnect battery cables. (Refer to TM 9-2320-273-20).
(2) Complete transmission removal procedure (para 2-11) with the following exceptions:
(a) It is not necessary to remove the main propeller shaft. Disconnect it from one end
only.
(b)
After the transmission is lowered from engine and frame, cover transmission opening
and allow transmission to remain in this position; it is not necessary to raise vehicle or move transmission.
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(70)
Drain coolant (refer to TM 9-2320-273-20).
Drain engine oil (refer to TM 9-2320-273-20).
Remove hood (refer to TM 9-2320-273-20).
Remove air cleaner assembly, inlet and outlet tubes (refer to TM 9-2320-273-20).
M915 Only – Remove bumper and towing eyes (refer to TM 9-2320-273-20).
M916 thru M920 – Remove brush guard (refer to TM 9-2320-273-20).
Remove radiator and radiator support rods (refer to TM 9-2320-273-20).
Disconnect exhaust tube from turbocharger (refer to TM 9-2320-273-20).
2-55