TM9-2320-273-34
(11) Loosen (turn in) nut (3, fig- 2-27) and nut (2) on alternator adjusting rod (4). Remove
capscrew (7) and washer; then disengage rod (4) from alternator. Swing alternator in toward engine as
far as it will go.
1.
NUT
5. BELT
2. NUT
6. CAPSCREW
3. NUT
7. CAPSCREW
4. ADJUSTING ROD
Figure 2-27. Disconnect Alternator Adjusting Rod.
(12)
Disconnect wire from horn. (Refer to TM 9-2320-273-20.)
TA 073970
2-56