TM-9-2320-273-34
TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
DECEMBER 1980
TM-9-2320-273-34 - Page 70 of 801
TM9-2320-273-34
(30) Install capscrew that fastens bracket to transmission. Tighten to 36 Ib-ft (47 N·m)
torque.
TA 073954
Figure 2-26. Install Transmission Dipstick Tube Bracket.
(31) Connect transmission oil cooler lines to transmission. (Refer to TM 9-2320-273-20).
(32) Install exhaust tubing. (Refer to TM9-2320-273-20).
(33) install exhaust support mounting bolt.
(34) Mount applicable components to the PTO as follows:
(a) Models M916, M917, M920. Swing hydraulic pump into place and secure to PTO
(Refer to TM 9-2320-273-20).
(b)
Model M918. Install prop shaft from PTO to hydraulic pump (Refer to TM 5-3895-
371-24&P).
(c) Model M919. Install prop shaft from PTO to lower PTO belt shaft (Refer to TM 5-
3895-372-20).
2-54
Back to Top
