TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 740 of 801

TM 9-2320-273-34

b.

Press out shaft (fig. 21-7).

Figure 21-7. Press Shaft Out of PTO Adapter.

c.

Remove gear, two bearings, and spacer(s). Measure thickness of spacer to aid in reassembly.

d.

If necessary, six studs and two dowel pins may be removed.

21-8. Reassembly of PTO Adapter.

a.

Assemble gear, two bearings, and spacer(s) (same thickness as removed) into housing as shown

in figures 21-6 and 21-7. Large gear and spacers positioned at same end of housing as the setscrew access

hole.

b.

Press shaft into housing with flat on shaft positioned over the setscrew access hole.

c.

Tighten setscrew to secure shaft.

21-11