TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 749 of 801

TM 9-2320-273-34

c.

Pull wires through hole in housing.

d.

Rotate control shutter located on the end of housing (fig. 22-4); then lift up and out of re-

taining holes.

Figure 22-4. Remove/Install Shutters.

e.

Rotate other control shutter to full upright position, as shown in the illustration; then slide it

out of retaining holes.

In step

f,

hold the motor and fan support

plate when removing the attaching cap-

screws. When lifting out the support

plate, do not rub against the heater core.

22-4

CAUTIO N