TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980
TM-9-2320-273-34

  TM-9-2320-273-34 - Page 754 of 801

k.
Support heater core (fig. 22-9) and remove four capscrews that fasten
out the core.
HEATER CORE
TM9-2320-273-34
the core to housing. Pull
Figure 22-9. Remove/Install Heater Core.
22-4.
Reassembly.
Position heater core in housing, carefully passing the water tubes through the protective pads
(fig. 22-9). Secure core to housing with four capscrews.
b.
Position motor in center of support plate (fig. 22-8) and set motor on two mounting brackets.
c.
Connect black wire; as shown in figure 22-8, and secure motor to mounting brackets with
four nuts.
d.
Position motor mounting brackets on support plate (fig. 22-7) and secure with four capscrews.
22-9


Back to Top