TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 410 of 951

1.

Install bracket (4) on body (17) with two screws (3).

2.

Install switch (14) and switch lever (15) on bracket (4) with two screws (16), lockwashers (2), and nuts (1).

3.

Install cover (7) and grommet (9) on wiring harness (8).

4.

Connect two leads (12) and (13) to switch (14) with two lockwashers (11) and screws (10).

5.

Slide cover (7) over switch (14) on bracket (4) with two washers (6) and screws (5).

4-94. BULKHEAD DOOR BLACKOUT SWITCH AND BRACKET MAINTENANCE

This task covers:

a. Removal

b. Installation

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Battery ground cable disconnected (para. 4-73).

a. Removal

1.

Remove two screws (5) and washers (6) from switch cover (7) and bracket (4). Slide cover (7) away

from switch (14) to allow access to switch (14).

NOTE

Prior to removal, tag leads for installation.

2.

Remove two screws (10) lockwashers (11), and two leads (12) and (13) from switch (14). Discard

lockwashers (11).

3.

Remove cover (7) and grommet (9) from wiring harness (8).

4.

Remove two nuts (1), lockwashers (2), screws (16), switch (14), and switch lever (15) from bracket (4).

Discard lockwashers (2).

5.

Remove two screws (3) and bracket (4) from body (17).

TM 9-2320-280-20-2

4-172

Change 3

INITIAL SETUP:

Applicable Models

M996, M996A1, M997, M997A1, M997A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Four lockwashers (Appendix G, Item 169)

b. Installation