TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 412 of 951

TM 9-2320-280-20-2

4-174

Change 3

4-95. BACKUP LIGHT ASSEMBLY MAINTENANCE (M996, M996A1, M997, M997A1, M997A2)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Battery ground cable disconnected (para. 4-73).

This task covers:

a. Light Assembly Removal

b. Light Assembly Installation

INITIAL SETUP:

Applicable Models

M996, M996A1, M997, M997A1, M997A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Four lockwashers (Appendix G, Item 136)

Two lockwashers (Appendix G, Item 139)

1.

Remove four screws (3) and lockwashers (2) from plate (6) and body (1). Pull plate (6) away from

body (1) to allow access to connections. Discard lockwashers (2).

2.

Remove two nuts (9), lockwashers (8), housing (5), and lead (7) from plate (6). Discard lockwashers (8).

3.

Disconnect lead (10) from lead (4). Remove housing (5).

4.

Inspect speed nuts (11) for damage. Replace if damaged.

a. Light Assembly Removal

b. Light Assembly Installation

1.

Install housing (5) and lead (7) on plate (6) with two lockwashers (8) and nuts (9).

2.

Connect lead (4) to lead (10).

3.

Install plate (6) on body (1) with four lockwashers (2) and screws (3).