TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 519 of 951

TM 9-2320-280-20-2

4-115. 200 AMPERE REGULATOR (12338796-1, S-311) REPLACEMENT (Cont’d)

NOT E

Perform steps 4 and 5 for M997A2, M1025A2, M1035A2,

M1043A2, M1045A2, and M1097A2 vehicles only.

4.

Install washer (24), lead (21), and nut (23) on terminal (25). Tighten nut (23) to 18-22 lb-in.

(2.0-2.5 Nom). Slide rubber boot (22) over terminal (25).

5.

Connect regulator connector (17) to alternator connector (16).

6.

Install washer (1), lead 5A (2), and nut (3) on red (energize) terminal (26). Tighten nut (3) to

23-27 lb-in. (2.6-3.0 N.m). Slide rubber boot (4) over terminal (26).

7.

Install washer (8), lead 2A (7), and nut (6) on yellow (AC) terminal (9). Tighten nut (6) to 18-22 lb-in.

(2.0-2.5 N.m). Slide rubber boot (5) over terminal (9).

8.

Connect regulator plug (13) to voltage regulator (12).

FOLLOW-ON TASK:

Lower and secure hood (TM 9-2320-280-10).

Connect battery ground cables (para. 4-73).

4-273