TM-9-2320-280-20-2

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 2 OF 3

JANUARY 1996

TM-9-2320-280-20-2 - Page 662 of 951

14.

Install tie rod end (4) into geared hub (5) with washer (3) and slotted nut (2). Tighten slotted nut (2)

to 70 lb-ft (95 N

•

m). Install cotter pin (1).

15.

Connect vent line (6) to geared hub fitting (8) with clamp (7).

16.

Install vent line (6) and clamp (9) to geared hub (5) with washer (10) and capscrew (11). Tighten

capscrew (11) to 38 lb-ft (52 N

•

m).

17.

Tighten drainplug (14) to 8-13 lb-ft (18-18 N

•

m).

18.

Remove fill plug (13) and washer (12) from geared hub (5).

19.

Fill geared hub (5) to proper level (para. 2-11).

2±0±

.

Install washer (12) and fill plug (13) to geared hub (5). Tighten fill plug (13) to 8-13 lb-ft (11-18 N

•

m±)±

.

6 - 1 1 . GEARED HUB REPLACEMENT (Cont'd)

TM 9-2320-280-20-2

6 - 3 0

Change 2