TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 237 of 1168

10-111. 6,000 LB AND 9,000 LB ELECTRIC WINCH VENT LINE REPLACEMENT

This task covers:

a. Removal

b.

Installation

a. Removal

1.

Disconnect vent line (2) from winch fitting (4).

2.

Remove three tiedown straps (5) and tiedown strap (6) (9,000 lb. winch only) from vent line (2) and

cables (1). Discard tiedown straps (5) and (6).

3.

Disconnect vent line (2) from tee fitting (3) and remove vent line (2).

INITIAL SETUP:

Applicable Models

M997A2, M1025A2, M1026, M1026A1,

M1035A2, M1036, M1038, M1038A1, M1042,

M1043A2, M1044, M1044A1, M1045A2,

M1046, M1046A1, M1097A2

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Four tiedown straps (Appendix G, Item 308)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

•Hood raised and secured (TM 9-2320-280-10).

•Engine right splash shield removed (para. 10-20).

b. Installation

TM 9-2320-280-20-3

10-192

Change 2

1.

Connect vent line (2) to tee fitting (3) and winch fitting (4).

2.

Install vent line (2) on cables (1) with tiedown strap (6) (9,000 lb. winch only) and three tiedown straps (5).

FOLLOW-ON TASK: • Lower and secure hood (TM 9-2320-280-10).

• Install engine right splash shield (para. 10-20).