TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 238 of 1168

10-112. FAIRLEAD ROLLER BRACKET ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP

TM 9-2320-280-20-3

Change 2

10-193

Applicable Models

All vehicles except M996, M996A1, M997,

M997A1, M997A2, M1035, M1035A1,

M1035A2

Tools

General mechanics tool kit:

automotive (Appendix B, Item 1)

Manual References

TM

9-2320-280-24P

General Safety Instructions

Winch must be supported during

removal and installation.

WARNING

Winch must be supported during removal and installation.

Failure to support winch may result in injury to personnel or

damage to equipment.

1.

Remove four retaining rings (11), two shafts (3), and rollers (5) from bracket (4).

2.

Remove four retaining rings (6), two shafts (10), and rollers (7) from bracket (4).

3.

Remove two capscrews (8), washers (9), and bracket (4) from bumper (1) and winch (2).

1.

Install bracket (4) on bumper (1) and winch (2) with two washers (9) and capscrews (8). Tighten

capscrews (8) to 35 lb-ft (47 N

•

m).

2.

Install two rollers (7) and shafts (10) in bracket (4) with four retaining rings (6).

3.

Install two rollers (5) and shafts (3) in bracket (4) with four retaining rings (11).

b. Installation

a. Removal

1

2

3

4

5

6

7

8

10

6

11

9