10-10. CENTER HOOD STOP GUIDE REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
Remove six locknuts (5), washers (2), capscrews (1), washers (2), two guide plates (3), and guide brackets
(4) from hood (6). Discard locknuts (5).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Six locknuts (Appendix G, Item 70)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Rear end of cargo shell door raised
(TM 9-2320-280-10).
b. Installation
Install two guide plates (3) and guide brackets (4) on hood (6) with six washers (2), capscrews (1),
washers (2), and locknuts (5). Tighten locknuts (5) to 10 lb-ft (14 N
•
m).
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10).
TM 9-2320-280-20-3
Change 2
10-15