TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 27 of 1168
10-7. SIDE HOOD STOP REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
Remove two locknuts (6), washers (5), capscrews (3), washers (2), and side hood stop (1) from body (4).
Discard locknuts (6).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 70)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Hood raised and secured (TM 9-2320-280-10).
b. Installation
Install side hood stop (1) on body (4) with two washers (2), capscrews (3), washers (5), and locknuts (6).
Tighten capscrews (3) to 6 lb-ft (8 N
•
m).
FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10).
TM 9-2320-280-20-3
10-12
Change 2
3
4
5
6
1
2
~
Back to Top
