10-9. FOOTMAN LOOP AND STRAP REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 74)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Rear end of cargo shell door raised
(TM 9-2320-280-10).
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-280-10).
TM 9-2320-280-20-3
10-14
Change 2
NOTE
All footman loops and straps for stowage and tiedowns are
replaced basically the same. This procedure covers the night sight
battery case footman loop and strap.
1.
Remove two locknuts (4), screws (1), and footman loop (2) from wheelhouse (3). Discard locknuts (4).
2.
Remove strap (5) from footman loop (2).
Install strap (5) on footman loop (2) and wheelhouse (3) with two screws (1) and locknuts (4). Tighten
locknuts (4) to 16-30 lb-in. (2-3 N
•
m).
b. Installation
a. Removal
1
2
3
4
5
~