TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996
TM-9-2320-280-20-3

  TM-9-2320-280-20-3 - Page 28 of 1168

TM 9-2320-280-20-3
10-8. CENTER HOOD STOP REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Manual References
TM 9-2320-280-10
TM 9-2320-280-24P
Equipment Condition
Hood raised and secured (TM 9-2320-280-10).
a. Removal
Remove two capscrews (1), washers (2), center hood stop (3), and plate (4) from “A” beam (5).
I
b. Installation
Install center hood stop (3) and plate (4) on “A” beam (5) with two washers (2) and
capscrews (1) to 12 lb-ft (16 N.m).
capscrews (1). Tighten
FOLLOW-ON TASK Lower and secure hood (TM 9-2320-280-10).
10-13


Back to Top