TM-9-2320-280-20-3

TRUCK, UTILITY: M998 SERIES

TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3

JANUARY 1996

TM-9-2320-280-20-3 - Page 598 of 1168

12-7. AIR CLEANER TO SELECTOR VALVE VENT LINE REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Disconnect air cleaner-to-selector valve vent line (2) from air cleaner assembly fitting (1).

2.

Remove three tiedown straps (3) and vent line (2) from existing hoses (4) on “A” beam (5).

Discard tiedown straps (3).

3.

Remove air cleaner-to-selector valve vent line (2) from selector valve (6).

INITIAL SETUP:

Applicable Models

All models except M966, M966A1, M1025,

M1025A1, M1025A2, M1026, M1026A1

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Three tiedown straps (Appendix G, Item 314)

Manual References

TM 9-2320-280-10

TM 9-2320-280-24P

Equipment Condition

Hood raised and secured (TM 9-2320-280-10).

b. Installation

1.

Connect air cleaner-to-selector valve vent line (2) to selector valve (6).

2.

Route vent line (2) along “A” beam (5) and secure to existing hoses (4) with three tiedown straps (3).

3.

Connect air cleaner-to-selector vent line (2) to air cleaner assembly fitting (1).

TM 9-2320-280-20-3

Change 2

12-9

FOLLOW-ON TASK: Lower and secure hood (TM 9-2320-280-10).