TM-9-2320-280-20-3
TRUCK, UTILITY: M998 SERIES
TECHNICAL MANUAL; UNIT MAINTENANCE; VOLUME 3 OF 3
JANUARY 1996
TM-9-2320-280-20-3 - Page 607 of 1168
12-15. EXHAUST REINFORCEMENT BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Remove two isolators (4) from wheelhouse (3) and reinforcement bracket (5).
2.
Remove eight locknuts (6), washers (1), capscrews (2), washers (1), and reinforcement bracket (5)
from wheelhouse (3). Discard locknuts (6).
INITIAL SETUP:
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Eight locknuts (Appendix G, Item 70)
Manual References
TM 9-2320-280-24P
Equipment Condition
Deep water fording kit exhaust assembly removed
(para. 12-2).
b. Installation
1.
Install reinforcement bracket (5) on wheelhouse (3) with eight washers (1), capscrews (2),
washers (1), and locknuts (6). Tighten capscrews (2) to 6 lb-ft (8 N
•
m).
2.
Install two isolators (4) on wheelhouse (3) and reinforcement bracket (5).
FOLLOW-ON TASK: Install deep water fording kit exhaust assembly (para. 12-2).
TM 9-2320-280-20-3
12-18
Change 2
1
2
3
5
1
6
4
~
Back to Top
