TM-9-2320-283-34-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-2 - Page 144 of 570

TM 9-2320-283-34-2

REAR TANDEM AXLES.

3-76. REAR-REAR AXLE CARRIER REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

NOTE

•If ring gear and drive pinion are to

be reused, determine backlash before

disassembly.

Use a suitable dial in-

dicator as illustrated in step 54.

•Mount rear-rear axle carrier in a

suitable overhaul stand.

1. Nut (21).

Remove from item (32).

Use tool No. J-3453 to

prevent item (31) from

turning.

NOTE

Rotate overhaul stand so that ring

gear is facing up.

2. Two caps (13) and

Center punch for correct

carrier (14).

This will provide for

location and alinement.

correct reassembly.

3. Spider (40) and

Center punch for correct

differential case

location and alinement.

assembly (1).

4. Two adjusters (8)

and (41).

Center punch for correct

If new ring gear and

location and alinement.

drive pinion assembly

are being installed,

it is not necessary to

center punch items (8)

and (40).

5. Lockwire (11).

Cut, remove, and discard.

6. Two pins (15) and

(30).

Remove from items (13),

(16), and (29).

Retain items (13),(16),

and (29). Discard item

(15) and (30).

3-700