TM 9-2320-283-34-2
REAR TANDEM AXLES.
3-76. REAR-REAR AXLE CARRIER REPAIR (Continued).
LOCATION/ITEM
ACTION
REMARKS
19. Pinion (32) and
bearing (34).
Remove from item (26) using
a suitable press.
20. Seal (22).
Remove from item (26) and
discard item (22).
21. Cone (23).
Remove from item (26).
22. Two cups (25).
Remove from item (26).
23. Spacer (28).
34. Cone (23) and
bearing (34).
Remove from item (32).
Remove from item (32).
Tag for correct location
during assembly. Use a
drift punch seated
against the backs of
item (25) to drive out,
Use a split type bearing
puller to push item (23)
and (34) away from teeth
of item (32). Mount
item (32) in a hydraulic
press and remove items
(23) and (34).
25. All parts.
Clean.
Refer to paragraph 3-4.
26. All parts.
Inspect.
Refer to paragraph 3-5.
CAUTION
Coat all parts with OE/HDO 30 lubri-
cating oil before assembly.
27. New cone (6).
Press onto item (4) using
suitable bearing installation
tool and hydraulic press.
3-706