TM-9-2320-283-34-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-2 - Page 154 of 570

TM 9-2320-283-34-2

REAR TANDEM AXLES.

3-76. REAR-REAR AXLE CARRIER REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

37. Two new cups (25).

Install in item (26) using a

Make certain items (25)

suitable bearing sleeve and

bottom in item (26).

hydraulic press.

Before complete

reassembly of drive

pinion,

the correct bearing spacer

will have to be determined after in-

stallation of pilot bearing and pinion

bearing cone.

Refer to step 51 for

trial build-up and step 52 for final

pinion bearing preload test to deter-

mine the correct size of spacer

to be

used.

38. New bearing (34).

Install onto end of item (32) Stake item (34) as shown

using suitable bearing sleeve

using tool No. J-26883,

for installation and

hydraulic press.

39. New cone (23).

Install onto item (32) using

Make certain item (23)

suitable bearing sleeve for

bottoms on item (32).

installation and hydraulic

press.

40. New spacer (28).

Install onto item (32).

Item (28) is available

in thirty-two different

sizes.

Use the correct

size as determined in

steps 51 and 52.

41. Cage (26).

42. New cone (23).

Install onto item (32).

Install onto item (32) using

a suitable bearing sleeve

and hydraulic press for

installation.

3-710