TM-9-2320-283-34-2

TRUCK TRACTOR, LINE HAUL, 50,000 GVWR, 6X4, MQ15A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1983

TM-9-2320-283-34-2 - Page 146 of 570

TM 9-2320-283-34-2

REAR TANDEM AXLES.

3-76. REAR-REAR AXLE CARRIER REPAIR (Continued).

LOCATION/ITEM

ACTION

REMARKS

7. Four screws (12)

and washers (10).

Remove from item (13).

Remove item (13) from item

(1).

8. Two adjusters (8)

and (41).

Remove from item (14).

9. Two cups (7) and

(42).

Remove from item (14).

10. Ring gear and

Remove as an assembly from

drive pinion (31), item (14).

Use a suitable chain

two cones (6) and

hoist attached to a

(43), and dif-

steel bar. Insert the

steel bar though the

assembly (1).

center of item (31) and

lift out.

NOTE

The differential case assembly and

ring gear

screws require excessive

force to remove.

It may be helpful to

mount the assembly in a hydraulic

press to initially loosen the screws.

11. Sixteen screws

(44).

Remove from item (33).

If item (33) will not

drop off, tap outer

diameter with soft

mallet to loosen.

12. Twelve screws

(3).

Remove from item (2) and

discard items (3).

13. Side gear and

pinion assembly

Remove from items (2) and

(35).

(4).

3-702