TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 1032 of 1320

TM 9-2320-304-14&P

5-268.4

Direct Support and General Support Maintenance (Cont)

5-43.

CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).

(1)

Deploy both slider assemblies by extending short and long struts (Para 2-10.1).

NOTE

Distance measured to outside edges of handles should be as close to but not exceed 100.4 in.

(255.02 cm). If distance measured between centers of slider pivot pins is 88.12 to 89.00 in.

(223.82 to 226.06 cm), no adjustment is required. Adjustment of struts is performed in steps

(2) through (14).

(2)

Soldier A and Soldier B measure distance between centers of slider pivot pins (1) and distance

from outside edges of handles (1.1).

(3)

Adjust long struts (2) so distance measured is 88.12 to 89.00 in. (223.82 to 226.06 cm) between

slider pivot pin (1) centers.

Change 3