TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 556 of 1320

TM 9-2320-304-14&P

4-158

Organizational Maintenance Instructions (Cont)

4-30. GENERAL WIRE HARNESS REPAIR (CONT).

WARNING

Tip of removal tool is very sharp. Use

caution when using tool. Failure to comply

may result in injury to personnel.

(c)

Insert removal tool into terminal

connector cavity (3) until seated.

(d)

Pull wire (4) back through

connector (1) and removal tool.

NOTE

•

Do step

(e)

only if old terminal is

still attached to wire.

•

Make cut directly behind damaged

terminal.

(e)

Cut off terminal (5) and wire

seal (6). Discard terminal and seal.

(2) Assembly.

(a)

Insert 1 in. (2.5 cm) of wire (4)

through new wire seal (6).

CAUTION

Strip wire after placing it through seal to

prevent damage to individual wire strands.

(b)

Strip end of wire (1) leaving 0.25

in. (0.6 cm) of bare wire.