TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 560 of 1320

TM 9-2320-304-14&P

4-162

Organizational Maintenance Instructions (Cont)

4-31. HYDRAULIC SELECTOR SWITCH REPLACEMENT (CONT).

NOTE

Tag and mark wires prior to removal.

(6)

Loosen eleven captive screws (10) and

remove wires 1724 (11), 1487 (12), 1483

(13), 1481 (14), 1480 (15), 1486 (16),

1482 (17), 1484 (18), and 1485 (19) from

hydraulic selector switch (8).

(7)

Remove two jumperwires (20) from

hydraulic selector switch (8).

(8)

Loosen twelve captive screws (21) and

remove wires 1488 (22), 1489 (23), and

1490 (24).

(9)

Remove nine jumperwires (25) from

hydraulic selector switch (8).

b. Installation.

(1)

Install three wires 1488 (1), 1489 (2),

and 1490 (3) in hydraulic selector

switch (4) with three captive screws (5).

(2)

Install nine jumperwires (6) in

hydraulic selector switch (4) with nine

captive screws (5).