TM-9-2320-304-14-P

LOAD HANDLING SYSTEM, HEAVY EXPANDED MOBILITY TACTICAL TRUCKS (HEMTT)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, AND DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2000

TM-9-2320-304-14-P - Page 557 of 1320

TM 9-2320-304-14&P

4-159

Organizational Maintenance Instructions (Cont)

(c)

Insert new terminal (5) in locating

hole of crimp tool using the proper

hole according to gage of wire (1).

(d)

Slide wire seal (2) down to end of

insulation (3) on wire (1).

NOTE

Wire and seal should be positioned so

larger wings of terminal will crimp around

insulation and smaller wings will crimp

around exposed bare wire.

(e)

Position wire (1) on terminal (3).

(f)

Press handles of crimp tool

together until ratchet releases and

crimp is complete.

(g)

Push new terminal (3) and wire (1)

through connector (4) until seated.

(h)

Install two secondary locks (5) on

connector (4).

(i)

Connect connector (4).

g. Follow-on Maintenance.

(1)

Connect batteries (TM 9-2320-279-20).

(2)

Remove wheel chocks

(TM 9-2320-279-10).

END OF TASK