TM-9-2320-328-13-P-1
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3
MARCH 2009
TM-9-2320-328-13-P-1 - Page 210 of 1318
TM 9-2320-328-13&P-1
0028-2
DRAFT
0028
NOTE
For Foam System operations, refer to WP 0024.
5.
Perform mission.
END OF TASK
STOPPING UNDER TRUCK NOZZLE AND PUMP AND ROLL/DRIVE OPERATIONS
NOTE
Perform Step (1) if foam system operations were required.
1.
Turn foam system off (WP 0024).
2.
Put UNDER TRUCK NOZZLES switch (3) to off position.
Indicator light (4) will go out.
3.
Put HIGH IDLE switch (5) to OFF position.
Indicator light (6) will go out.
4.
Put PUMP PTO switch (7) to off position.
Indicator light (8) will go out.
5.
Put TANK TO PUMP switch (1) to off position.
Indicator light (2) will go out.
NOTE
Perform Step (6) if foam system operations were required.
6.
Perform foam system flushing procedures (WP 0029).
7.
If mission complete, perform post operation procedures (WP 0030).
END OF TASK
END OF WORK PACKAGE
HWT02725A
Back to Top
