TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 213 of 1318

TM 9-2320-328-13&P-1

0029-3

DRAFT

0029

Change 1

8.

Flush portable equipment such as hoses, nozzles, monitors, etc.

NOTE

Perform the following steps to flush foam system piping from discharges that were not

used.

9.

Perform bumper turret discharge operations (WP 0027) until water runs clear from bumper turret discharge.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

10. Put UNDER TRUCK NOZZLES switch (4) to on position.

Indicator light (5) will illuminate.

11. When water runs clear from under truck nozzles, put UNDER TRUCK NOZZLES switch (4) to off position.

Indicator light (5) will go out.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

12. Open lower pump house access door (WP 0009).

13. Pull hose nozzle (6) away from truck to a suitable draining location.

14. Open hose nozzle (6).

HWT0297A

HWT0298