TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 228 of 1318

TM 9-2320-328-13&P-1

0031-4

DRAFT

0031

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

15. Disconnect 5 in. (13 cm) soft discharge hose from driver side main inlet (2) and positive water source.

16. Install cap (1) on driver side main inlet (2).

17. If required, perform Post Operation Procedures (WP 0030).

END OF TASK

WATER TANK FLUSH

NOTE

When performing water tank flush, water tank must be filled using a positive water source

(hydrant).

1.

Fill water tank (WP 0015).

2.

Drain water tank (WP 0015).

END OF TASK

END OF WORK PACKAGE

HWT2846