TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 229 of 1318

TM 9-2320-328-13&P-1

0032-1

DRAFT

0032

Change 1

OPERATOR MAINTENANCE

PREPARATION FOR STORAGE OR SHIPMENT

PREPARATION FOR STORAGE (LONG TERM: 6 MONTHS OR LONGER)

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

WARNING

Be sure to wear proper eye protection to prevent injury or death.

Ensure vehicle is

parked in a location where personnel and other equipment will be protected from

water spraying out of discharges and drains during draining and blow out

procedures.

Position vehicle so that it is level from side-to-side and either slightly

nose down or level front-to-back.

Failure to comply may cause damage to

equipment and/or injury to personnel.

1.

Position vehicle in a suitable location to drain and pump out remaining water.

2.

Drain and flush foam tanks (WP 0022).

3.

Flush water pump and tank (WP 0031).

4.

Perform Preventive Maintenance Checks and Services (PMCS), Including Lubrication Instructions (WP 0129).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

5.

Remove DRIVER SIDE AUX. INLET cap (1), NO. 1 DRIVER SIDE DISCHARGE cap (2), PASSENGER SIDE

AUX. INLET cap (3), NO. 2 PASSENGER SIDE DISCHARGE cap (4), main inlet cap (5), and DIRECT TANK

FILL cap (6).

ICON 26

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT3135