TM-9-2320-328-13-P-1

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3

MARCH 2009

TM-9-2320-328-13-P-1 - Page 226 of 1318

TM 9-2320-328-13&P-1

0031-2

DRAFT

0031

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Do not let pressure exceed 125 psi (862 kPa).

Failure to comply may result in injury

or death to personnel and/or damage to equipment.

NOTE

If pressure exceeds 125 psi (862 kPa) notify Supervisor.

4.

Remove cap (3) from driver side discharge (4).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

5.

Put PUMP PTO switch (5) to on position.

Indicator light (6) will illuminate.

6.

Put HIGH IDLE switch (7) to ON position.

Indicator light (8) will illuminate.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

HWT0308

WARNING

ICON 72

HWT2723

.

.

.

.

.

.

.

.

.

.

CAUTION

Engine must be at idle before engaging PTO.

Failure to comply will result in

damage to PTO and/or transmission.