TM-9-2320-328-13-P-1
HEMTT-BASED WATER TENDER (HEWATT)
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 1 OF 3
MARCH 2009
TM-9-2320-328-13-P-1 - Page 427 of 1318
TM 9-2320-328-13&P-1
0058-7/(8 blank)
DRAFT
0058
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2320-422-10)
END OF TASK
END OF WORK PACKAGE
HWT0896
Step 8.
Release bumper turret control agent discharge button (WP 0004).
Put bumper turret
power switch to
(off) position (WP 0004).
Pull battery disconnect switch to off
position (WP 0007).
With a test lead set, check for continuity across wire 2200 (black)
from pump house wire harness bumper turret foam metering control valve connector,
terminal 2 to a known good ground.
a.
If there is continuity, replace bumper turret foam metering control
valve (WP 0271).
b.
If there is no continuity, repair wire 2200 in pump house wire harness if
repairable
(TM 9-2320-325-14&P), or replace pump house wire
harness (WP 0302).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Back to Top
